Brushless Vibrator Installed In Feton Vibration Table
It is a brushless vibrator model TSL-1215-912-101(long life span) are commonly used in equipment that requires precise and controlled movement for example, for instance the Futon tablet that vibrates. The motor is attached to an eccentric weight which turns and produces a vibration force. Through varying both the direction and speed of the motor the intensity of vibration and pattern can be adjusted to create the desired result.
In the instance for the Futon tablet The motor is utilized to generate a pattern of vibration that resembles the feeling of massage. The vibration could help powder medicine drop on capsules evenly. It will provide a pleasant experience for the user and also provide the advantages of reliable and efficient motor control.

Feton Fillers’s Powder Filling Machines With Brushless Vibrator
Preparing the powder Ensure that the powder is kept in a safe place and is ready for use.
Make sure that the machine for filling powder can be cleaned, and it is prepared to use. Set the machine’s settings to the specifications of the container and powder.
Add the powder: Pour it into a machine that feeds the powder to the filling system.
Start filling the process by turning on the machine, and then begin your filling procedure. The powder is dispensed into the container in accordance to the machine’s settings.
Clean up and finish the job After the container is fully filled, take it off the machine.

Long Life Brushless Vibration Datasheet
Brushless vibrators are ideal for this kind of job due to their high efficiency and reliable. They can also be controlled with precision by electronic circuits. Furthermore, because they are brushless, they create lesser noise, and are less prone to maintenance that conventional motors that use brushed technology.
Motor Model | TSL-1215-912-101 |
Rated Voltage | 5.0V DC |
No.Of Phase | 3 phase |
KV | 3600rpm |
Rated Load | Tungsten steel vibrator R5.7*5.0mm |
Operating Voltage | 3.5-6.5V DC |
Rated Speed | 12000rpm±15% |
Rated Current | 380mA Max |
Stall Current | 850mA Max |
Starting Voltage | 3.5V DC Max |
Terminal Resistance | 6.5Ω ±15% |
Typical Norm. Amplitude | 30G |
For Detail | Click |